|
|
B-Flat Coax 8" Wallspeaker Detail:
Square / Round / Round Chambered
| Frequency Response: |
50-20kHz ± 3db wall mounted |
| Nominal Impedance: |
8 ohms, minimum 6 ohms |
| Sensitivity: |
88db 1 watt/1 meter |
| Dimensions: |
Round: 10 3/4" Dia.
Square: 10 1/16" (Both with 3 1/2" Depth)
[Round Chambered: 11" Dia. x 7 5/8" Depth] |
| Cut Out Dimensions: |
Round: 9 1/2" Dia.
Square: 8 7/8" (Both mount in any 2x4 wall)
[Chambered: 9 5/8" Dia. Mounting depth 8"] |
| Tweeter: |
1" Textile dome with
neodymium magnet and ferro-fluid cooling. Pivotal tweeter up
to 15 degrees allows high frequencies to be focused in the direction of
the listening area. |
| Bass-Midrange: |
8" Polypropylene cone, rubber
surround |
Recommended
RMS Power: |
20 to 80 watts per channel |
| Input Terminals: |
Spring loaded for barewire or pins [Chambered:
Gold plated push on for barewire or pins] |
| Recommended Accessories: |
ACI In-wall, UL approved
cable, Volume controls, Force or Titan subwoofer |
Other B-Flat Coax 8" Features Include:
Available in white, however the frame and mesh (metal)
grill may be painted to match your decor.
Round models ideal for mounting in ceilings.
View Round
with Grill
Chambered model helps cut down on sound transmission to
adjacent rooms. Fire resistant chamber.
Chambered model includes Gold Plated
Push On Terminals
View
Back of Chambered
View
Chambered with Grill
Audiophile quality crossover parts
View
Square X-Over
View Round
X-Over
|
Easy Installation! The B-Flats flush-mount in virtually
any wall or ceiling that is at least two inches thick. Run audio
wire in the wall before installing the B-Flats. The B-Flats are
supplied with a template to cut the correct hole, spin-out clamps to
pinch drywall, instructions for
installation and all the required hardware. View
Installation Instructions
 ACI
offers optional stereo volume controls for your wallspeakers. Perfect for
installed speaker applications where single to multiple pairs of
speakers are to be used. Built-in impedance matching feature greatly
eases the installation. Simply by changing jumper settings on the
rear of the control, speaker impedance is increased x2, x4 or x8. Up
to 11 pairs of 8 ohm speakers may be connected to a single source
and appear as a 4 ohm load.
View & Order Volume Controls
In-Wall Speaker Wire:
(UL) CL3 & FT4 Ratings meet all fire codes
View
& Order In-Wall Speaker Wire
Back to the Main
B-Flat Coax 8" Speaker Page
|
B-Flat Coax 8" Wallspeaker Notes...
-
Compared to competing designs
costing two to three times as much!
-
Provide sound quality of large
expensive speakers without taking up the space
-
Pivotal tweeter up to 15
degrees allows high frequencies to be focused in the direction of
the listening area
-
Chambered model helps cut down on sound transmission to
adjacent rooms
-
Fire resistant chamber
-
Easy installation!
-
Mount in any wall that is at
least two inches thick
-
Spin-out clamps to pinch
drywall
-
Suited to a wide range of
applications
-
Use them as main speakers or
extension speakers anywhere in the house
-
Ideal for home-theater because
they can be built into your side or rear walls or even your
ceiling
-
Our customers tell us that the
B-Flats are easily the very "best buy" of
wallspeakers
|
